kaydee
Should be a Team Member
Posts: 159
|
Post by kaydee on Nov 2, 2007 14:55:33 GMT 1
Hello
Any chance of making up a couple of escape proof harnesses in dark colours, maybe 26" & 28".
Thank you.
|
|
|
Post by Ditzylips on Nov 3, 2007 13:56:28 GMT 1
"For an escape proof harness, I need the following measurements:
1. Circumference of the base of the neck.
2. Circumference of the chest at its deepest point.
3. Circumference of the waist at it's narrowest point.
4. The length from the base of the neck to the point on the back/spine above the narrowest part of the waist.
These harnesses are designed along the lines of an extended trail harness. The waist strap fits behind the ribcage and will only act against that if the dog attempts to pull backwards as a means to slip its harness. Usually they try, realise it is pointless, and then give up trying.
I have a little horror of a dog here who could slip out of anything, and she inspired the design. She has never managed to get out of one of these harnesses, however, they aren't suitable for a dog whose belly is bigger than its chest! "
Al may already have some made up that would be suitable but if not it's usually possible to make something up.
|
|